WARNING
: Make sure to disconnect the Lift Motor input power/control cable or it is
possible for the crossramp to automatically lower to the default level 1 if either the
pedal arms are moved or the CrossRamp Test is exited. This unexpected action
could cause personal injury.
3. Remove the Stairarm wheel truck assemble from the ramp track and lay the Stairarm
on the floor. To remove, grasp the bottom of the wheel truck assembly and lift up and
outward from the track. No tools or fastener removal is required. It may help to lift the
outer edge of the CrossRamp cover while removing.
4. Use a short stub #3 screwdriver to remove the one screw and washer that secures the
Ramp cover and remove. Retain part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 171
6 Replacement Procedures
Ramp Replacement
