Installation Instructions
Ramp Pivot hinge Installation
1. Position the Ramp Pivot hinge onto the frame weldment ramp pivot hinge mounting
bracket and secure using New left and right 3/4" (19 mm) ramp pivot hinge Nylock bolts
(2x), flat washers (2x), spacers (2x).
Torque
1
bolts to 1080 in-lbs (90 ft-lbs or 122 Nm).
CAUTION
: Do not reuse the Ramp Pivot Hinge Nylock patch bolts for installation.
Discard the used bolts and order new bolts for installation (see
,
bubble # 361).
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center of
the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 174
6 Replacement Procedures
Ramp Replacement