9. Reconnect the Lift Motor input power/control cable and/or the battery negative/positive
terminals if disconnected.
10. Do a
QUICKSTART
workout and operate the elliptical at
INCLINE
level 1 and
RESISTANCE
level 1 at 130 strides per minute for two minutes, or longer, to break-in
the wax and verify operation. While operating the machine, listen for wheel squeak or
other unusual noises:
a. If there were wheel squeaking or unusual noises, visually inspect the Ramp
tracks to confirm wax coverage across the entire wheel contact path. If not,
reapply the wax and repeat the wax break-in operation.
b. At the completion of the wax break-in, gently wipe away any excess wax with a
clean rag.
11. Verify machine operation and return to service, see
.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 178
6 Replacement Procedures
Ramp Replacement
