yellow state.
Clearing the pulsing yellow ASL state
An ASL pulsing yellow state is triggered when an error code event occurs and is logged. To
clear a pulsing yellow state, the error condition causing the ASL pulsing yellow must first be
resolved either manually or the machine may resolve and self-clear the issue. A manually or
machine self-cleared error code will change the ASL state from pulsing yellow to the solid yel-
low state.
Clearing the solid yellow ASL state
P10, P30, P30i and P31 consoles:
On P10, P30, P30i and P31 consoles, clearing the error code from the Error Log resets the
ASL state from solid yellow to the solid blue state.
P62, P80, and P82 consoles:
1. On P62, P80, and P82 consoles, the
Maintenance
>
Operating Condition
parameter
must be reset from the
Inspect
condition to the
Normal
condition. After resetting the
Operating Condition to Normal, the ASL state will change from solid yellow to the solid
blue state.
2. Then go to the
CPA
1
Event Log
and clear the error code by selecting the
Clear
con-
trol.
Note
: Clearing the CPA Event Log does NOT clear the error codes from the Event
Log.
1
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 195
7 Troubleshooting
Active Status Light (ASL)