Information Display (65)
Service Access Code: 65 (see
"Service Menu Access Codes" on page 17
)
Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.
INFORMATION DISPLAY
DESCRIPTION
ODOMETER
The total number of accumulated miles on the unit.
This value is stored in the upper
PCA
1
in the console so if
the PCA is replaced the accumulated miles would start
again from "0".
HOUR METER
The total number of hours that the unit took to accumulate
unit miles.
This value is stored in the upper PCA in the console so if
that PCA is replaced the hours of use would start again
from "0".
BELT RATING
(1)
(Treadmills with the ASL feature only)
Displays the belt rating from 10 (best) to 0 (worst).
Belt rating ≤ 1 replace the running belt
A belt rating of 0 or 1 will cause a blue pulsing ASL light
indicating that there is a problem with the running belt/-
deck and requires servicing or replacement.
Important
: Reset the Belt Rating after replacing with a
new running belt and deck ( hold down
QuickStart
).
MAINT COUNTER
(1)
Provides machine next maintenance due remaining
mileage or hours. Perform preventative maintenance
when the maintenance counter reaches 0.
Press/Hold the
PAUSE/RESET
key to reset the counter
(treadmills reset to 1000 miles, ellipticals reset to 250
Hrs).
Belt Maintenance
(2)
(
TRM
2
600 only)
Information used to help determine the condition of the
running belt and when the belt needs to be replaced. Belt
Maintenance provides the averaged input current values
at 6, 8, and 10 mph across 50 workouts. Measurements
are only taken when AutoStop is ON and the incline is set
to 0%.
1
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
2
Treadmill
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 29
4 Standard Service Menus
LED Console Standard Service Menus
