5. Reconnect either the disconnected battery negative terminal or the Lift Motor input
power/control cable.
6. Select
QUICKSTART
and operate the elliptical at
INCLINE
level 1 and
RESISTANCE
level 1 at 130 strides per minute for two minutes, or longer, while listening for
wheel/track squeaking or other unusual noises.
a. If there are wheel/ramp squeaking noises, apply a thin coat of Swix UR10 Yellow
Bio Racing ski wax (or equivalent) to the wheel contact area of the ramp tracks.
Rub the wax back and forth across the track several times. .
b. Repeat the prior QUICKSTART workout conditions to break-in the new wax
application and verify operation.
c. At the completion of the wax break-in, gently wipe away any excess wax with a
clean rag.
7. Verify operation and return to service, see
"Operation Verification" on page 14
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 72
6 Replacement Procedures
Covers and Panels Replacement