manualshive.com logo in svg

Precor Experience Series, Service Manual

The Precor Experience Series offers an exceptional fitness experience, and now you can enhance your workout with the Service Manual. Download this comprehensive manual for free from our website, providing you with all the necessary instructions and information to optimize your fitness training.

Share
Download
background image

Introduction

Only Precor certified technicians are authorized to service Precor equipment. If you are not a
Precor certified servicer, you must not attempt to service any Precor product. Call your dealer
for service information

WARNING

: This service documentation is for use by Precor certified servicer providers

only. Personal injury can result from electrical shock and/or mechanical moving parts.

This service manual applies to the Experience™ Series 600 Line

EFX

1

®

models with the

EFX600-18 Base.

Model

EFX600-18 Configuration

EFX633

Fixed Arms, Moving CrossRamp, and P30 LED console

EFX635

Moving Arms, Moving CrossRamp, and P30 LED console

EFX663

Fixed Arms, Moving CrossRamp, and P62 touchscreen console

EFX665

Moving Arms, Moving CrossRamp, and P62 touchscreen con-
sole

EFX685

Moving Arms, Moving CrossRamp, and P82 touchscreen con-
sole

1

Elliptical Fitness Crosstrainer

Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.

Page 1

1 Introduction

Summary of Contents for Experience Series

























































































































































































































































Reviews:

No comments

Related manuals for Experience Series

York Fitness Active 120 Owner'S Manual preview
Active 120
Brand: York Fitness Pages: 24
Align-Pilates M8-Pro Reformer Assembly Instructions & User Manual preview
M8-Pro Reformer
Brand: Align-Pilates Pages: 12
Johnson Fitness 1.2E Replacement Manual preview
1.2E
Brand: Johnson Fitness Pages: 2
Spokey 838401 Manual preview
838401
Brand: Spokey Pages: 48
Spokey 838400 User Manual preview
838400
Brand: Spokey Pages: 48
Spokey 836447 Manual preview
836447
Brand: Spokey Pages: 56
Merrithew Spine Supporter Manual preview
Spine Supporter
Brand: Merrithew Pages: 4
Body Sculpture BE-5920 Manual preview
BE-5920
Brand: Body Sculpture Pages: 14
Diamondback 360 Ef Owner'S Manual preview
360 Ef
Brand: Diamondback Pages: 20
Diamondback 1190 Er Owner'S Manual preview
1190 Er
Brand: Diamondback Pages: 44
Taurus TF-X105-2 Assembly And Operating Instructions Manual preview
TF-X105-2
Brand: Taurus Pages: 48
Eurosport CROSSFIT 99 Owner'S Manual preview
CROSSFIT 99
Brand: Eurosport Pages: 26
Tectrix Personal Climber Owner'S Manual preview
Personal Climber
Brand: Tectrix Pages: 36
Teeter FreeStep Repacking Manual preview
FreeStep
Brand: Teeter Pages: 2
Trojan DUAL 510 Instruction And Assembly Manual preview
DUAL 510
Brand: Trojan Pages: 26
Reebok V 6.80 Treadmill (French) Manuel De L'Utilisateur preview
V 6.80 Treadmill
Brand: Reebok Pages: 32
Precor CW-702 Assembly Manual preview
CW-702
Brand: Precor Pages: 44
Insportline 8726 User Manual preview
8726
Brand: Insportline Pages: 20

Brands by name

Popular brands

Load more brands