page 5
DANGER
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceperson if you are
in doubt as to whether the treadmill is properly grounded. Do not modify the
plug provided with the treadmill—if it will not fit the outlet, have a proper outlet
installed by a qualified technician.
The treadmill is for use on a nominal 120-volt circuit (refer to the WARNING
below and to the
Installation Requirements on page 4) and has a grounding
plug that looks like the plug illustrated in Diagram A. Make sure that the
treadmill is connected to an outlet having the same configuration as the plug.
No adapter should be used to connect the treadmill to a power outlet or power
transformer. If the treadmill must be reconnected for use on a different type of
electrical circuit, the reconnection should be made by qualified service
personnel.
Proper grounding
plug and power
outlet for 120v
connection
WARNING
This product is for use on a circuit (1) rated for more than 15 amps and is for
use on a circuit having a nominal rating of 120 volts or (2) having a nominal
rating of more than 120 volts and is factory-equipped with a specific electric
cord and plug to permit connection to a proper electric circuit. Make sure that
the product is connected to an outlet having the same configuration as the plug.
No adapter should be used with this product. If the product must be
reconnected for use on a different type of electric circuit, the reconnection
should be made by qualified service personnel.
ATTENTION: Haute Tension
Débranchez avant de réparer.
Safety Information—Save These Instructions
Diagram A
