page 43
Displaying the Odometer and Software Version
To display the total number of miles or kilometers that the treadmill has accumulated, the
software version number, and the error messages stored in memory, take the following steps:
1.
In rapid succession, press STOP, SPEED
▲
and then SPEED
▼
. (The numbers 6, 5 appear
on the display as you press the respective key.)
Note: You need to press SPEED
▲
within 1 second after pressing STOP or the Precor
banner returns and you need to start step 1 over again.
2.
The cumulative odometer totals appear on the display. Cycle through all four user I.D.’s by
pressing any
▼
or
▲
key. Then the combined cumulative total appears for the User I.D.’s.
3.
Press a
▼
or
▲
key again and the combined odometer total for the treadmill appears. (This
includes Manual courses accessed through QUICK START that are not associated with any
User I.D., so the total can be more than the User I.D. sum.)
4.
To view the software version, press ENTER. The software part number appears in the two
upper right displays with the version number appearing in the lower right display. These
numbers are useful if you need to call customer service.
5.
To review the past ten error messages stored in the unit, press ENTER again. To clear error
messages, simultaneously press and hold STOP and QUICK START for a few seconds when
an error message is displayed.
6.
Press ENTER to return to the Precor banner.
Obtaining Service
Do not attempt to service the M9.25i Low Impact Treadmill yourself except for minor belt adjust-
ments and maintenance as described in this manual. The M9.25i treadmill does not contain any
user-serviceable parts.
For information about product operation or service, contact an authorized Precor dealer or a Precor
Factory Authorized Service Company. To locate the dealer or service person nearest you, call 1-
800-4-PRECOR.
To help the customer service representative expedite your call, have your serial number available.
The serial number on the M9.25i treadmill is printed on a label located underneath the treadmill at
the left, rear corner of the running bed frame. If you haven't already written the serial number in the
space provided below during the assembly process, you will need to get on your knees and bend
down to see it.
Model number: ___________ Serial number: _________________________
If you have any questions regarding the treadmill, use the model and serial numbers whenever you
call your Precor dealer or service person.
M9.25i
