©2019 Precor Inc. | Triceps Extension RSL 208 | Assembly Guide
5
4
2 M12 x 125 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
Connect main frame to seat base . Attach long,
horizon-
tal
fasteners
first
through side of seat base. Fully tighten to align
holes for shorter fasteners in next step
5
2 M12 x 35 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
Next, attach shorter fasteners from behind.
6
Tools: Hex wrench, 10 mm
Socket wrench, 19 mm
Torque wrench
Gently rock the frame to align.
Tighten all M12 fasteners to a
torque of 55 ft-lb (75 N-m).
Do not tighten the M10 screws installed in step 3 at this time.
They will be removed temporarily in a later step.
1
2
37
2
1
37
40
2
1
37
41
37
40
41
