©2019 Precor Inc. | Converging Shoulder Press RSL 515 | Assembly Guide
7
Moving Parts
Image
Hardware
Instructions
1
2 collars
Slide collars onto arm shafts on main frame. Ensure flat sides of
collars are towards main frame.
2
Slide left arm and right arm onto shafts at top of main
frame . Each arm has and labels. Match the arm labels
with the labels at the top of the main frame to ensure proper
placement.
3
2 washers, rubber
2 washers, 12.2 mm ID x 35 mm OD
2 M12 x 25 mm SHCS
Tool: Hex wrench, 10 mm
Slide washers on to each arm in order shown. Hold washers cen-
tered and secure.
4
2 end plugs with sleeves
Tool: Mallet
Slide end plugs with sleeves onto ends of arms. Tap gently with
mallet if needed.
Remove all and labels.
3
2
L
R
1
33
L
R
33
2
L
R
L
3
43 36
37
1
L
R
34
34
36
37
43
L
R
