©2019 Precor Inc. | Prone Leg Curl RSL 606 | Assembly Guide
10
11
1 weight labels
Remove back of labels. Align top holes on labels and top weight and place pin
into hole. Remove pin and place into a lower hole on labels. Re-align labels as
necessary and then press firmly onto weights. Rub vigorously and thoroughly to
adhere. Peel the extra label away and rub remaining labels again.
12
Lubricate the guide rods with a Teflon-based lubricant, such as Tri-Flow Superior
Lubricant. Remove any excess with a clean cloth or tissue.
29