©2019 Precor Inc. | Seated Leg Curl RSL 619 | Assembly Guide
8
6
2 M12 x 35 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
Connect pivot support frame to thigh restraint support .
7
2 M12 x 125 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
Connect pivot support frame to main frame .
8
Tools: Hex wrench, 10 mm
Socket wrench, 19 mm
Torque wrench
Gently rock the frame to align.
Tighten all M12 fasteners to a
torque of 55 ft-lb (75 N-m).
Do not tighten the M10 screws installed in step 1 at this time.
They will be removed temporarily in a later step.
3
39
1
2
55
39
56
1
3
2
55
56
39
39
2
