©2019 Precor Inc. | Seated Leg Curl RSL 619 | Assembly Guide
9
Moving Parts
Image
Hardware
Instructions
1
1 end cap
1 M12 x 35 mm FHCS
Tool: Hex wrench, 8 mm
Slide pivot arm onto shaft on pivot support frame . Align hole in
end cap with pin on shaft and secure.
2
1 spring
1 washer, 12.2 mm ID x 35 mm OD, black
1 M12 x 25 mm SHCS
Tool: Hex wrench, 10 mm
Slide spring onto thigh restraint support followed by the thigh
restraint assembly . Secure as shown.
3
2 end plugs with sleeves
Tool: Mallet
Place end plugs with sleeves onto ends as shown. Tap gently with
mallet if needed.
2
8
41
58
3
36
38
54
4
3
4
37
3
36
37
4
8
2
41
54
58
38