©2019 Precor Inc. | Inner Thigh RSL 620 | Assembly Guide
10
Route the Cable
Image
Hardware
Instructions
1
Route cable through pulley on lower cross brace. Slide cable through cable
retainer and around pulley groove.
2
Tools: Hex wrench, 8 mm
Hex wrench, 4 mm
To route the cable around the lower pulley on the weight stack tower, remove
the cable retainer. Route the cable around the pulley and then replace the
cable retainer.
3
Tools: Hex wrench, 8 mm
Open-end wrench, 19 mm
Torque wrench
T
o route the cable to the upper pulleys of weight stack tower, remove the cable
retainers, route the cables, and replace the retainers.
Tighten to 50 ft-lb (67
N-m) of torque.
4
4 M10 x 25 mm SHCS
4 washers, 11 mm, black
Tools: Hex wrench, 8 mm
Torque wrench
Mount foot plate to lower cross brace .
Tighten to 42 ft-lb (57 N-m) of
torque.
1
43
8
43
56
1
8
56
