©2019 Precor Inc. | Outer Thigh RSL 621 | Assembly Guide
5
Frame Assembly
DO NOT
tighten fasteners until instructed to do so.
Have your assistant hold frame parts in place during assembly.
Image
Hardware
Instructions
1
4 M12 x 130 mm SHCS
8 washers, 13 mm
4 M12 nylon lock nuts
Tools: Hex wrench, 10 mm
Socket wrench, 19 mm
2 M10 x 125 mm BHCS
1 washer, 11 mm
Connect lower cross brace to weight stack tower and kick
plate . Insert the fasteners from the outside of the kick plate.
Align to far right hole under pulley.
Insert guide rod fasteners, one from each side, to align the kick
plate.
Hand tighten only.
These will be removed temporarily in
a later step.
2
2 M8 nylon lock nuts
2 washers, 9 mm
Tool: Socket wrench, 13 mm
with extension
Turn the main frame upside down and connect the seat
plate .
Do not fully tighten.
This will be done in a later step.
CAUTION!
Do not drop hardware down frame tube.
1
10
11
47
49
2
51
52
7
1
10
11
2
1
10
49
52
54
35
11
49
47
54
35
54
2
56
7
51
56
