©2019 Precor Inc. | Outer Thigh RSL 621 | Assembly Guide
7
Moving Parts
Image
Hardware
Instructions
1
1 hex head screw 5/16-inch x 1½-inch
Set a
temporary
fastener in the
front
hole (see arrow) of the seat
plate to hold it in place during leg installation. Install LEFT leg assem
-
bly first and ensure shaft at top rests within partial collar under seat.
Match the labels on the leg and lower cross brace.
Important
Place the
stopper
(see lower
arrow) under the left leg assembly behind
of the rear foot. If not placed behind,
the leg movement will be incorrect.
2
Repeat to install RIGHT leg pulley . Match the labels on the leg
and lower cross brace.
3
2 collars
4 M6 x 20 mm SHCS
Tool: Hex wrench, 5 mm with extension
Have assistant gently press knee bars together and center in frame.
Secure the legs with the collars under the seat.
Do not fully tighten the collars yet.
Remove all and labels.
7
39
3
36
4
41
36
41
39
3
7
39
4
7
L
R
3
L
R
