6. Remove the data COMM cable from the handlebar assembly:
a. Remove the two 2.5 mm hex key bolts (2x) and remove the handlebar post cable
cover.
b. Attach a cable puller to the console connector end of the data COMM cable.
c. Pull the handlebar height adjust pop pin and carefully lift the handlebar post from
the top of the frame weldment. While holding the handlebar assembly, gently pull
the data COMM cable and attached cable puller from the inside of the handlebar
post.
d. Disconnect the data COMM cable from the cable puller and set the handlebar
post aside. The cable puller will be used to reinstall the cable through the inside of
58
5 Replacement Procedures
Data COMM Cable Replacement