Page 2
For technical questions, please call 1-888-866-5797.
ITEM 62548
Table of Contents
Specifications ............................................. 2
Safety ......................................................... 3
Setup .......................................................... 6
Operation .................................................... 8
Maintenance .............................................. 13
Troubleshooting ......................................... 18
Parts List and Diagram .............................. 20
Warranties ................................................. 23
Specifications
Front Tine Tiller Specifications
Maximum Tilling Depth
6.5" (165 mm)
Maximum Tilling Width
26" (660 mm)
Drive Type
Belt and Chain
Drive Actuation
Clutch Drive (Handle Lever Operated)
Depth Adjustment Steps
6
Overall Dimensions
51" L x 25" W x 42-1/2" H
Wheels
8" Diameter x 1-3/4" W
Weight
118 Pounds
Engine Specifications
Displacement
208cc
Engine Type
Horizontal Single Cylinder
4-stroke
Cooling System
Forced air cooled
Fuel
Type
87+ octane unleaded gasoline
treated with fuel stabilizer
Capacity
0.66 Gallon (2.5 Liter)
Engine Oil
Type SAE
10W-30 above 32° F
5W-30 at 32° F or below
Capacity
20 ounces (0.6 Liter)
Sound Level at 1 meter
95 dB
Bore x Stroke
70 mm x 54 mm
Compression Ratio
8.8:1
Rotation
viewed from PTO
(power takeoff - the output shaft)
Counterclockwise
Spark Plug
Type
Torch
®
F6TC
Gap
0.7– 0.8 mm
Valve Clearance
Intake
0.15 – 0.20 mm
Exhaust
0.15 – 0.20 mm
Speed
Idle
1560 ± 50 RPM
The emissions control system for this Engine is warranted for standards set by the
U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual.
