Assembly Instructions, POWER RAIL
TM
‒ Two-Tier Tilt Kit
5
5 Check the “L” Foot and the Leg Alignment to the Marks on the Strongback and Torque Hardware
Ensure that the “L” Foot and the Leg align to the marks on the Strongback, then tighten the hardware and
torque to
45-50 ft.-lbs.
Torque
45-50 ft.-lbs.
Torque
45-50 ft.-lbs.
Torque
45-50 ft.-lbs.
Ensure that the attachment
points align to marks on the
Strongback
Insert a 1/2”-13 x 1-1/2” Carriage Bolt into the channel
of the Strongback and align it to the previously made
alignment mark. Secure with a 1/2” Flat Washer, Lock
Washer, and Nut.
Secure the Leg to the “L” Foot with a 1/2”-13 x 1-1/2”
Bolt, Flat Washers, Lock Washer, and Nut. Tool tighten
for now, allowing for any adjustments in next step.
4 Attach the Strongback and then the Leg to their respective “L” Feet
“L” Foot
Alignment
Mark
Strongback
Leg
