User Guide
EH1230
OPERATION
Switch the unit on at the mains socket, then press ON/OFF button
(6). The unit will then start. The display (11) will show the ambient
temperature in degrees Celsius.
The unit will start in the Automatic mode with the trianglew symbol
(7) illuminated.Press TEMP+ (3) or TEMP- (4) to set the desired
room temperature.
If the desired room temperature is below ambient temperature, the
unit will automatically select cooling mode and the "snowflake"
indicator (8) will be illuminated, and the "COMP" indicator (15) will
also illuminate to indicate that the compressor is running. The fan
speed will also be selected automatically. The fan speed indicators
(13) or (14) will indicate whether slow of fast fan speed is in
operation.
If the desired room temperature is above the ambient temperature
then no cooling will take place. The fan will run at its slow speed.
"Fan only mode" indicator (9) and "slow fan speed" indicator (13)
will be illuminated. The "compressor"
indicator will not be illuminated. This model will not act as a heater.
Page 6