7
Description of Pre-Loaded Aura Flight Modes (FM)
Each of the modes has been tuned by our team to offer a solid
start. Because tastes in control feel are unique, if changes in
rates and expo are needed, adjustments should be made
through the Aura.
Changes in gain value can only be made through the Aura.
REFERENCE ONLY: Aura Settings
Aura 8
Rate Setup
Aileron
Elevator
Rudder
Mode 1
Mode 2
Mode 3
REFE
RENCE
ONL
Y
Aileron
Elevator
Rudder
Aura 8
Expo Setup
AURA 8 AFCS
Works conveniently with all major radio systems
Accepts signals from DSM Remote Receiver(s), Spektrum
SRXL, Futaba S.Bus, Graupner Hott (Sum D of 8), JR
XBus (Mode B), Jeti UDI12 (standard), Hitec S.Bus, PPM
Stream, or any brand of receiver via male to male servo
connectors
Expertly tuned and ready to use
USB port allows loading model configurations, user
programming, and firmware updates (cable included)
Flexible and extensive programming through Windows-
based PC or tablet
3+ flight modes allow precise or aggressive settings to be
selected in flight
3-axis gyro utilized in QQ Extra 300G2 programming
The Aura 8 Advanced Flight Control System (AFCS) installed in
your QQ Extra 300G2 is a giant leap forward in aircraft flight control
system technology. Compatible with virtually every receiver on the
market today, the Aura features special configuration for DSM
systems via remote receiver connection(s), and serial data
connection for Futaba or Hitec S.Bus, Spektrum SRXL, Graupner
HOTT (Sum D of 8), JR XBus (Mode B), and Jeti UDI12 (standard)
systems, as well as being compatible with traditional receivers via
PWM servo connections.
The Aura 8 advanced flight control system in your QQ Extra 300G2
has been pre-tuned for ease of use, eliminating many hours of
tedious setup. For the latest Aura features, programs, transmitter
downloads, and instructions, please visit wiki.flexinnovations.com/
wiki/Aura
The Aura is programmable through any Windows based PC or
tablet. All dual rate, expo, travel, and assignable mode programs
are adjusted inside the Aura through the PC application. An
assignable master gain that is OFF by default can be enabled by
the Aura application. If desired, assign CH 8/AUX 3 on a
proportional dial or slider.
By default, CH5/Gear is used to select the 3 flight modes by 3
position transmitter switch.
CH6/Aux 1 is used to select the on/
off position of the LED controller by 2 position transmitter switch
(night version only).
Visit wiki.flexinnovations.com/wiki/Aura for the
latest Aura-related product information and
tips for your particular radio brand.
Mode 1 (Gyro Off):
Rates are set for general flight (same as
Sport Mode). Exponential is tuned for comfortable flight.
Mode 2 (Sport Mode):
Gains are moderate and tuned for
comfortable feel/best performance for precision aerobatics.
Aileron and elevator rates are low and expo is tuned for
comfortable flight.
Mode 3 (3D Mode):
Gains are highest and tuned for 3D
aerobatics. Rates are set to highest. Exponential is tuned for
comfortable flight.
100%
100%
95%
Mode 1
Mode 2
Mode 3
30%
25%
30%
15%
10%
25%
30%
25%
25%
DO NOT PROGRAM THESE VALUES INTO
YOUR TRANSMITTER!
NOTICE
The shown Aura 8 settings are pre-configued and the unit is ready
to use. The chart shown is for informational purposes only. No
additional action is required to fly the airplane.
REFERENCE ONLY: Aura Settings
40%
23%
95%
40%
23%
95%
Summary of Contents for QQ EXTRA 300G2
Page 1: ...Day Night Versions Day Night Versions G2 G2 ...
Page 2: ......
