background image

User Guide 

P. 6

 

The user-selectable options are as follows: 

 

Safe Start 

 

Remote Door Locks  

 

Passive or Active Arming 

 

Disarm Notification 

 

Shock Sense and Warn-Away 

Sense 

 

Siren Chirps 

 

Ignition-Controlled Door Locks 

 

Ignition Re-Lock 

 

Secure Lock 

 

Remote Trunk Release 

 

Starter Kill 

 

Engine Run Time 

 

Multi-Car Operation 

Safe Start 

Safety feature: 

Safe Start features will prevent accidental remote starts. 

If this feature is enabled, the user must press the 

START/STOP

 button 2 times within 3 

seconds to remote-start the vehicle. 

If 

Swap Start

 Mode has been configured by your installer, to remote-start your vehicle 

press 

LOCK

 and 

UNLOCK

 simultaneously. (Press 

START/STOP

 to trigger the 

AUX 2

 output.) 

Safe Start features will eliminate accidental remote starts, e.g. when there are children 

playing with the transmitter. 

Remote Door Locks 

If your system was installed with the Remote Door Locks option, you will have the 
convenience of remote keyless entry. 

To 

UNLOCK

 

your doors and 

DISARM

 

the system: 

1.

 

Press and hold the 

UNLOCK

 button for approx. 1 sec. 

2.

 

The parking lights will flash twice and the LED will go out to confirm that the doors 

have been unlocked, that the Starter Kill feature is disarmed (if it was installed) and 
that the Alarm is disabled. 

To 

LOCK

 

your doors and 

ARM

 

the system: 

1.

 

Press and hold the 

LOCK

 button for approx. 1 sec. 

2.

 

The parking lights will flash once and the LED will flash slowly to confirm that the 
doors have been locked, that the Starter Kill feature is enabled (if it was installed) 

and that the Alarm is armed. 

Passive or Active Arming 

By default, the system is configured to 

Passive Arming Mode

. In Passive Arming Mode, 

the Starter Kill and the Alarm will automatically arm 

30 seconds 

after the last door is 

closed. The system will not arm itself if a door is left open. 

Important note:

 When the system re-arms automatically or if there is an Alarm condition, you 

can disarm the system by simply pressing the 

UNLOCK

 button. 

Disarmed Notification 

(

OFF

 by default.) This feature will notify the user when the vehicle was left disarmed: after 

the Engine has been shut down and all doors have been closed, after 10 seconds the 

horn will honk once if the doors have been left unlocked. 

Summary of Contents for System THREE SH











Reviews: