10
Troubleshooting
If you cannot solve the problem by using this guide,
see page 11 for warranty details and call for service.
Problem
Check For
A
No Power
Make sure the chair is plugged in
Make sure the main power switch on your
chair is 'ON' (illuminated)
Check the fuse and replace if burned out (fuse
location is below the red power switch)
B
Chair will not re-
cline
Check the White 'R' wire connector under-
neath your chair.
C
Foot massage will
not work
Check the Yellow 'A' wire connector under-
neath your chair.
D
Chair 'jams' while
reclining or makes
loud 'popping'
noises while reclin-
ing
Referring to this manual and the setup instruc-
tions, check to ensure the chair back is
latched to chair seat correctly (page 5)
E
Chair is operating
erratically, or won't
respond to remote
Follow the procedure for B, and
'Reset' the chair by 1) turning off power on
your remote, 2) turn off the power on the main
switch on your chair, 3) unplug the power
cord. Allow to remain off for at least 10 min-
utes. Then power the chair back on by revers-
ing the sequence.
