Page 4
Installation Instructions
GB-PLEN1 Installation with PP-FCTA
Step 1.
Loosen the wing nuts (do not remove) on
the upper adapter plate.
GB-PLEN1
Step 2.
Slide the mounting rails
(threaded holes facing up) between the
upper adapter plate and the PP-FCTA.
Wing Nut
PP-FCTA
Plate
PP-FCTA
Mounting
Rails
Upper Adapter
Plate
Upper Adapter
Plate
Slide Guide
Wing nut
Step 3.
Determine final placement of the upper
adapter
plate.
Step 4.
Tighten the wing nuts.
All four wing nuts must be parallel with the
slide guide. If not, the Gear Box will not sit
correctly on the PP-FCTA (see illustration
arrow above).
The GB-PLEN1 is designed for use with either the PP-FCTA or PP-FCMA. After installing your
selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1.
