www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
DOWN
UP
Figure 4
. Leveling the Mounting Bracket
M5 Security
Allen Wrench
Level
Inverted
Projector
Leveling
Barrels
Adjusting the
Mount.
Secure but do not over tighten the mounting hardware. Failure to do so will result in damaging the threads in the projector.
Sécurisé, mais ne pas trop serrer le matériel de fixation. Dans le cas contraire, vous risquez d'endommager les filetages dans le
projecteur.
Step 1. Rotate the leveling barrels to level the mounting bracket.
Step 2. Position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp and filter access doors).
Step 3. When the desired position is achieved, tighten the mounting screws to the projector and then tighten the security hex head leg
screw with the M5 Security Allen Wrench (Figure 4).
Leveling the Mounting Bracket
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PBC-UM SERIES
