background image

Page 2  

 

 

 

 

 

 

 

 

                    Installation Instructions

Table of Contents

PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT 

FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACH-

MENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR 

CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY 

SUCH USE, ATTACHMENTS OR MODIFICATIONS.
THE  SURFACE  MUST  BE  CAPABLE  OF  SUPPORTING AT  LEAST  FIVE TIMES THE WEIGHT  OF THE  PROJECTOR.  IF  NOT, 

THE STRUCTURE MUST BE REINFORCED. THE MAXIMUM WEIGHT THAT CAN BE USED WITH THIS PRODUCT IS 75LBS.  

PROPER  INSTALLATION  PROCEDURE  BY  A  QUALIFIED  SERVICE  TECHNICIAN,  AS  OUTLINED  IN  THE  INSTALLATION 

INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN 

DEATH.

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER 

SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

At least two qualified people should perform the assembly procedure. Injury and/or damage can result from dropping or mishandling the 

projector.

If mounting to studs, make sure that the mounting screws are anchored into the center of the studs. Use of an edge-to-edge stud finder is 

 

recommended.

Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no electrical wires 

in wall. Cutting/drilling into an electrical line may cause serious injury.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact

Contact Premier Mounts with any questions 

(800) 368-9700

techsupport@mounts.com

PRIOR  TO  THE  INSTALLATION  OF  THIS  PRODUCT,  THE  INSTALLATION  INSTRUCTIONS  SHOULD  BE  READ AND  COM-

PLETELY  UNDERSTOOD.  THE  INSTALLATION  INSTRUCTIONS  MUST  BE  READ  TO  PREVENT  PERSONAL  INJURY  AND 

PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE 

REFERENCE.

Make sure there are no water lines inside the wall where the mount is to be located. Cutting/drilling into a water line may cause severe water 

damage to the mounting surface.

Warning Statements

 

Warning Statements 

 

 

 

 

 

 

 

 

 

 

2

 

Parts List 

 

 

 

 

 

 

 

 

 

 

 

3

 

Installation Tools  

 

 

 

 

 

 

 

 

 

 

3

 

Determining the Installation Height  

 

 

 

 

 

 

 

 

4

 

Wood Stud Installation 

 

 

 

 

 

 

 

 

 

 

5

 

Solid Surface Installation   

 

 

 

 

 

 

 

 

 

6

 

Utilizing the Storage Feature 

 

 

 

 

 

 

 

 

 

7

 

Attaching the Projector Arm 

 

 

 

 

 

 

 

 

 

7

 

Throw Distance Calculation 

 

 

 

 

 

 

 

 

 

 

Upper Mounting Bracket Installation 

 

 

 

 

 

 

 

 

9

 

Extension Arm Installation  

 

 

 

 

 

 

 

 

 

10

 

Base Box Installation 

 

 

 

 

 

 

 

 

 

 

10

 

Cable Management 

 

 

 

 

 

 

 

 

 

 

11

 

Set Screw Installation (Optional)   

 

 

 

 

 

 

 

 

11 

 

Technical Specifications   

 

 

 

 

 

 

 

 

 

12

 

Warranty 

 

 

 

 

 

 

 

 

 

 

 

13

WMK-027

Summary of Contents for WMK-027














Reviews: