background image

 

 

TO  SET  TIMER 

continued   

When 1 minute is remaining on the timer, a one second tone will sound.  When the timer reaches    

zero (00:0), there will be three tones 1 second apart, then a tone every 10 seconds for 10 min.   
 
NOTE: 
The colon flashes when the timer is active whether the timer or the time of day is displayed.  To display the time 

of day when in the timer mode, depress the ”CLOCK” button.  To cancel, the timer, depress the ”TIMER” button once when the 
timer is displayed or twice when the time of day is displayed. 

TIME OF DAY CLOCK-No Timer 

TO SET TIME OF DAY:  

Depress hour set button until 

the  correct  hour  of  the  day  is  displayed  on  the  clock.       
Depress minute set  button  until the correct minute of  the 
day is displayed. 

The appliance outlet circuit breaker is located next to the appliance outlet on 
the backguard.  The circuit breaker is rated for 12 amps.  To reset the circuit 
breaker, unplug the appliance from the outlet and push the reset button in the 

center of the circuit breaker. 

The appliance outlet is located on the top of the range backguard.  It may be 
used to run portable appliances placed on countertop beside the range. 

 

PORCELAIN OVEN INTERIOR-     Porcelain has a smooth  finish, and is  a type  of glass fused to metal.  With  proper care,  the 

porcelain enamel walls in these ovens will retain their good looking finish for many years. 
Food soil that is allowed to harden and bake on can be difficult to remove. 
Clean the oven before it is  entirely cool (not while it is hot) with detergent and water, using a soap-filled steel wool pad on 

burned spots.  Rinse and wipe dry. 
 
Commercial oven cleaners may be used on oven interior.  After using cleaners, thoroughly rinse the oven with a solution of one 
tablespoon vinegar to one cup water.  Oven cleaners can coat or damage the temperature sensing bulb (long tube in the oven) 

so that it will not sense temperature correctly.  If you are using an oven cleaner, try to avoid any contact with the rod-shaped 
bulb of the thermostat.  Be sure that any residue that touches the bulb is carefully remove. 
 

Oven  racks  are  removed  by  pulling  forward,  tilting  and  lifting  up.    Racks  may  be  washed  with  detergent  and  water.    Scour  
heavily soiled areas with a soap-filled steel wool pad.  Oven windows may be washed with a damp cloth dipped in detergent 
and warm water, or a solution of baking soda and water. 

WARNING:  

KEEP APPLIANCE AREA CLEAR AND FREE FROM COMBUSTIBLE MATERIALS, GASOLINE AND 

OTHER FLAMMABLE VAPORS AND LIQUIDS. 

OUTLET CIRCUIT BREAKER - 

Optional on some models

 

APPLIANCE OUTLET - 

Optional on some models

 

CARE AND CLEANING 

Summary of Contents for ECS2X0BP





















Reviews: