P-8
WATER MAY BE PLACED CAREFULLY IN THE FREEZER TO SPEED UP THE
DEFROSTING.
NEVER USE HAIRDRYERS, ELECTRICAL HEATERS OR OTHER SUCH ELECTRICAL
APPLIANCES FOR DEFROSTING. WHEN DEFROSTING HAS FINISHED FLOW OUT
DEFROST WATER WHICH COLLECTS AT THE BOTTOM OF THE FREEZER AS THE
BELOW DIAGRAM AND DRY THE INTERIOR THOROUGHLY. SWITCH ON THE FAST
FREEZE AND LEAVE IT ON FOR ABOUT THREE HOURS.
1. THERE IS A WATER CONDUIT AT THE BOTTOM OF THE FREEZER, WHEN
DEFROSTING, EXTRACT THE RUBBER COVER, DEFROSTED WATER WILL DRIP
INTO THE HOLE AND FLOW OUT. (NOTES: PLEASE KEEP THE RUBBER COVER
WELL DURING THE DEFROSTING AND PUT IT BACK AFTER DEFROSTING IS
DONE )
2. EXTRACT THE WATER CONDUIT BY 20-25MM UNTIL THE WATER HOLE CAN BE
SEEN.
3. TWIST THE WATER CONDUIT UNTIL THE ARROW POINTS DOWNWARD.
4. AFTER DEFROSTING IS DONE, MAKE SURE THERE IS NO MORE WATER
COMING OUT BEFORE OUT THE WATER CONDUIT IN PLACE AND MAKE THE
ARROW POINT UPWARD.
IMPORTANT NOTES:
• DO NOT USE POINTED OR SHARP-EDGED OBJECTS SUCH AS KNIVES OR
FORKS TO REMOVE THE FROST.
• NEVER USE HAIRDRYERS, ELECTRICAL HEATERS OR OTHER SUCH
ELECTRICAL APPLIANCES FOR DEFROSTING.
CLEANING AND CARE
** WE RECOMMEND THAT YOU SWITCH OFF THE FREEZER AT THE SOCKET
OUTLET AND PULL OUT THE MAINS PLUG BEFORE CLEANING.
** NEVER USE ANY SHARP ABRASIVE INSTRUMENT, SOAP, HOUSEHOLD
CLEANER, DETERGENT AND WAX POLISH FOR CLEANING.
** USE LUKEWARM WATER TO CLEAN THE CABINET OF THE FREEZER AND WIPE
