5
4.4
12A Overload Protector
（
Fig 3,1.4
）
CGZL series blow-dryers are equipped with 12A overload protectors. It will automatically cut
off the circuit once current is over 12A due to circuit fault. Press “Reset” button when the
circuit fault is eliminated. Please contact authorized service center or your local dealer if the
“Reset” button pops out again.
Fig. 3
5.0 Parallel Operations
As the rated current of the axial blow-dryer is 2.5A, the similar blow-dryers can be connected
through the power socket (Fig. 3, 1.2) on the operating panel. The overload protector with
current of 12A on the operating panel allows 4 axial blow-dryers to use in parallel at the
same time (Figure 4).
Fig. 4
6.0 Drying Range
The current industry standard requires a blow drier guarantee the straight drying length of 5
meters; some industry standards of commercial constructions specify that a blow drier
should guarantee 5
～
6 square meters.
The time to dry off a standard size area is far less than other drying equipment by using
CGZL series blow-dryer. Especially for large-area building the CGZL series can dry off more
