P-2
Important Safety Instructions
Read this user manual carefully before you use the appliance and save it for future reference.
• Always turn off and unplug the appliance before you reach into the blender jar with your fingers or an
object (e.g. a spatula).
• Never use your fingers or any object other than the provided ‘pusher’ to push ingredients down the
feed tube while the appliance is plugged in.
• Be very careful when you handle the blades or inserts; make sure the product is first unplugged. Be
especially careful when you remove them from the bowl or jar, when you empty the bowl or jar and
when you clean them. Their cutting edges are very sharp.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Young children must be supervised to ensure that they do not play with the appliance.
• The appliance is for indoor, household use only. Keep the appliance out of the reach of children.
• Do not allow children to use the appliance without supervision.
• Check that the voltage indicated on the appliance corresponds to the local mains voltage before you
connect the appliance.
• Never let the appliance run unattended.
• In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
• Your appliance, on first use, may emit light smoke and some odour for a little while; this is just the
excess coating being heated off the inside of the appliance. This is not cause for concern, and should
stop after a few minutes. [If there is still smoke after 15 mins of continuous use, please contact
Customer Service for assistance]
• Do not use the appliance if the mains cord, the plug or other parts are damaged.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Always switch off the appliance by turning the control knob to 0. Switch off the appliance before you
detach or attach any accessory.
• Unplug the appliance immediately after use.
• Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
• Wait until moving parts stop running before you remove the lid of the bowl or jug.
• Do not exceed the maximum content indicated on the bowl or the blender jug.
• Care must be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts
that move in use.
• The accessories provided are for use with this machine only. The machine is intended for processing
food only.
Summary of Contents for ED-5229
Page 8: ......
