INTELL
ISHOCK
_ +
10"
20"
30"
40"
50"
WARNING
ELECTRIC FENCE
REMIER
P
2031 300th Street
Washington IA 52353
800-282-6631
319-653-7622
C. 5-Light
Tester
D. Surge
Protector
E. Insulated
Cable
H. EquiLine
I. Conductor
J./K./L. Insulators
N. HT Wire
Staples
O. Gripple P. Gripple
Tensioning Tool
Q. P Spring Combination
3. 2. 1.
Up to 20 ft between line posts
B.
E.
I.
J.
N.
F.
G.
Q.
H.
A.
L.
O.
K.
Insert End and Corner
Wood Posts 42"–48"
Insert
T Posts 18"
Insert Line
Wood Post 38"–48"
O.
M. Premier
Hot Top
Fence diagram
A. Battery or Plug-in Energizers
B. Galv. Rod, 6' x 5/8"
#151000
Stainless Clamp
#151800
C. 5-Light Tester
#134100
D. Surge Protector
#156500
E. Insulated Cable
F. Warning Sign
#346000
G. Cut-Out Switch
#333000
M. Premier Hot Top
#381000
N. HT Wire Staples, 1.6"
#360200
HT Wire Staples, Box
#360210
O. Gripple, large, 8 g
#336810
P. Gripple Tensioning Tool
#336830
Q. P Spring Combination
1. TuffRing II Ins.
#380705
2. SS P Spring
#255010
3. RopeLink 2.0
#256210
Illustrates how to attach the insulator,
P spring, rope and RopeLink to a wood post.
To install EquiLine Star
• Use 5 or 6 strands spaced 10 to 12 in. apart.
• Total height: 50 to 60 in.
• Either thread through the posts or use staples to attach it to
the post. Attach a strand of offset electrical rope at 36 in.
Vary this to match size of horse(s).
• Attach EquiLine Star to end-posts via knots or Anchors.
Anchors are inserted into end posts with EquiLine Star
passing through them. Anchors are held in position via
strain from the EquiLine. EquiLine Star can be tensioned
through an Anchor via a Strainer.
• Strainer pulls EquiLine Star through the Anchor. Coupler
can be used to connect two ends of EquiLine Star, typically
used to splice rolls together.
• Coupler operates similar to a finger trap, EquiLine is inserted
into both ends of the Coupler and are held via tension.
H. EquiLine, 2000'
#470000
I. EnduraSoft 6.0, 660'
#256500
IntelliBraid, 660'
#256710
IntelliRope PE 6.0, 660'
#256900
IntelliRope PE 4.5, 660'
#245100
J. Rotating Corner Post Ins.
#380900
K. SplitBall Offset Ins.
#390300
L. Premier Combo Ins.
#380321
The option to Gripples
or Anchors are hand-tied
knots. Because nylon
monofilament is so smooth
and elastic, the knot
should be made as shown.
Anchors are inserted into end posts with EquiLine Star
passing through them. Anchors are held in position via
strain from the EquiLine. Strainer pulls EquiLine Star
through the Anchor.
Ways to terminate at ends
Gripples used to
terminate EquiLine at an
end post. They are quick,
simple and effective.
Gripples can also be used
as a splice.
Anchor
Coupler
Wire Anchor
Strainer
A coupler (splice) can be used
to connect 2 ends of EquiLine Star,
typically used to splice rolls together.
Operates similar to a finger trap.
EquiLine is inserted into both ends of
the coupler and held via tension.
See detailed information for
installation on our website.
