Pagina 18
SYSTEM SETTING
Choose Setup in the main menu. Short press / to select the setting option and short press Menu key
to confirm. Long press Menu will back to the main menu. Long press PLAY to power off the player.
RECORD TIME
Short press the “VOL” key enter the year, month, date, hour, minute or seconds mode. And then press
/ key to modify it. At last please press Menu key to confirm the setting and exit from the system time
menu.
LCD SET
MAIN MENU SELECT:
In the mode, you can select the picture for the main interface.
BLACK SET:
Set fixed period of time (unit: second) so that when no key operation is performed, the
players screen will turn black automatically. If “0” is selected, function is invalid.
LANGUAGE SETTING
Users can choose the language under this mode. In the interface of language, press / to choose
the language and press M key to confirm the selection and exit from the language setting at the same
time.
POWER OFF SETTING
OFF TIME:
Means that if no any operation during the pre-set time, the system will power off
automatically. (Unit: second), there are 0-60 for choice, 0 means do not use this function
SLEEP TIME:
It means that after working for xxx minutes (xxx=preset time), the system will power off
automatically. There is 0-240 for choice, 0 means do not use this function. Sleep mode is only valid once
when it is been set. The system will delete the setting automatically after it works. If you need this
function, please reset once more.
REPLAY MODE SETTING
MANUAL REPLAY:
When use A-B repeat function, it cannot break automatically.
AUTO REPLAY:
It is used in the English learning; the system can pause between the first sentence and
the second sentence automatically.
ONLINE MODE
Users can set the online modes here, some operating systems (under Windows 2K SP4) cannot support
two driver letters in one USB disk. Thus, if “Private Space” function is on, choose the which disk you are
going to use, i.e., “single ordinary disk” or “single encrypted disk” in order for correct display of selected
disk after connecting to PC.
MULTI DRIVER:
you can see the Normal section and Encrypted section in My Computer.
NORMAL ONLY:
only the Normal section shown in My Computer.
ENCRYPTED ONLY:
only the Encrypted section shown in My Computer.
Pagina 19
MEMORY INFO
Users can check the memory information here. E.g.: 3911 means the total capacity of the player, 47%
means 47% part of the total capacity has been used.
FIRMWARE VERSION
Users can check the firmware of the player here.
FIRMWARE UPGRADE
1. To upgrade the firmware of the player, please run MP3/4 Player Upgrade Tool from Driver CD (for
Windows 98 to Windows XP only), then you can use these functions from which.
2. Before using this application, please confirm that only one MP3/4 Player is connected PC normally.
When the program runs, it will show the detail of the existing and new firmware, when you select a
firmware file (*.bin or *.fw) which can be downloaded from the official website.
3. Click ‘Start Upgrade’, the upgrade will be on process. After one minute, process will finish and the
player will restart, this shows the firmware upgrade process succeeded.
NOTE
•
Firmware upgrade is to improve player’s performance or recover the damaged internal firmware. If
it’s in normal status, it’s suggested that do not upgrade the firmware.
•
Please make sure the new firmware software you selected must be suitable for the model you are
about to upgrade. Firmware upgrade process CANNOT be reversed.
•
DO NOT disconnect the player during upgrading or recovering process.
EXIT
Exit back to the Main menu.
