Premier NV-2201, Instruction Manual

Page 8

 INSTALLING  AND  REMOVING  THE  ACCESSORIES

1.  To dismantle the slide shelf: fold the shelf, then pull it straight upward 
       levellingly. Installing it just in the opposite way.

The sides of the refrigerator heat up. The sides of the refrigerator heat up while the condenser
is working, but this will not influence on storage  performace. 

It  takes a  span of  time for the temperature  of  the freezer  and  refrigerator  compartments to 
become cold while the refrigerator is working: If the temperature of the two compartments  are 
higher while the refrigerator is working,  it takes  a span of  time for the  temperature of  the two 
compartments to decrease. 

The surface of the compressor becomes hot: It is normal for the surface of the compressor to 
get hot in good working condition. Don

'

t touch it with your hands.

 THE  FOLLOWING  CASES  ARE  NOT  MALFUNCTION

2.If  you   need  to   replace  the   lamp, pleas  according   to   below  instruction,
       .Pull  out  the  power  plug  first,
        

.Aim at the bolt ora. Screw  the bolt lax by tools.

.Hold  the   both   side  of   lamp-chim ney, take out it follow the   arrowhead 

           direction in the photo,
       .Unscrew  the  old  lamp; replace  the  new lamp,
       .install  the  lamp-chimney  again.
        Note: the lamp  power is 10W.