Premier NV-2201, Instruction Manual

Page 9

SITUATION

When you hear a sound like water flowing:
The sound like water flowing is actually the refrigerant(cooling gas) flowing. It does not 
indicate a malfunction.
When condensation forms on the outside of the refrigerator:
Condensation may form on the outside when then humidity is high e.g. During a wet season.
This is the same as when chilled water is poured into a glass. It does not, therefore, indicate 
a failure. Wipe the surface dry with a dry cloth.

INSTRUCTIONS  FOR  ONES  OWN  INSPECTION

If any case of malfunction happens, please inspect and dispel it according to the methods 
shown in the following table.

INSPECTION

Not cooling 

sufficiently

Not refrigerating

Food frozen in the

refrigerator 

compartment

Water leaks from

refrigerator

compartment

Noises

Compressor does

not stop 

working

automatically

Check if there is a power failure
Check if the power cord is plugged into the power outlet.
Check that the fuse (or circuit-breaker) has not blown.

The food may be packed too tightly together which block the flow of 
cool air.
You may have put in something hot or a lot of foodstuffs into the 
refrigerator.
The temperature control dial may not have been set properly.
The door may not have been closed properly.
The door gasket may be damaged.
The refrigerator may not be well ventilated.
There may be insufficient space between the refrigerator and the 
surfaces immediate to the sides and top.

Have the temperature controls of the compartment and chilled case
been set to  colder  position?
Is the normal surrounding temperature below 5

?

Have the foodstuff been put too crowdedly?

Is the drainage pipe blocked?
Is there any leakage from some objects stored in it?

Is the refrigerator installed firmly?
Has the refrigerator been struck by some other objects?

Is the food stored too much at one time?
Are the doors opened too frequently or too long?
Are the temperature controls of freezer and refrigerator
compartments set to  colder  position?

If the above methods do not solve the problem, please contact the service centers for assistance 
without any delay.