P-3
BASIC CONNECTION
y
It is recommended to connect a multi-system TV.
y
Ensure that this player and other equipment to be connected are set to OFF mode and
disconnect the AC/DC adapter before commencing connection.
y
Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
y
Read through the instructions before connecting other equipment.
y
Ensure that you observe the color coding when connecting audio, video cables. If the RCA
adapter is supplied only, the audio/video RCA cable is required. Plug one end of the RCA
adapter to the unit. Then connect the audio/video RCA cable to the RCA adapter and the
television.
Note:
y
During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If
this is the case, adjust the volume to the desired level.
y
If the DVD/VCD/CD player is connected to the TV through a video cassette recorder, the
picture may not be played back normally with some DVDs. If this is the case, do not
connect the player via the VCR.
CONNECTING TO A STEREO TV SET
After connection is firmed and securely done, plug AC/DC adapter to an applicable wall outlet
and turn on the player.
CONNECTING THE AERIAL TO THE PLAYER
A/V cable
TV SET
Aerial input
CATV
Optional
