CT-XSL01 | User’s Manual
Registers Description
GPIO I/O Select
I/O Register: 0xEC
Note.
Bit X = 0 means Input Mode
Bit X = 1 means Output Mode
The GPIO function is provided by Nuvoton NCT6106D, and it can be accessed through its GPIO
index/data port. To access the GPIO register, write index to the index port, and then read/write from/to
data port. The configuration on the CT-XSL01 is described as below.
GPIO I/O Select
Data Register: 0xED
Note.
Bit X = 0 outputs 0 when in output mode
Bit X = 1 outputs 1 when in output mode
3.2 Watchdog Timer
3.2.1 Board Design
The Watchdog Timer (WDT) is implemented by Nuvoton NCT6106D.
33
Chapter 3: Features & Interface
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
GPO3
GPO2
GPO1
GPO0
GPI3
GPI2
GPI1
GPI0
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
GPO3
GPO2
GPO1
GPO0
GPI3
GPI2
GPI1
GPI0
Register
Address
WDT Base Address
0xF0h
Summary of Contents for CT-XSL01 Series
