2
TO INSTALL THE HIGH BAY
3. Using the pre-installed 10’ wire, connect to the power supply:
•
Black wire to line (hot)
•
White wire to neutral (In the case of 208 or 240 line voltage, the 2nd hot leg will
be connected to the white lead coming from the fixture.)
•
Green wire to ground
4. Turn on power to the fixture and test the luminaire.
1. Use a wrench to tighten the nut on the
integrated hook.
2. Hang the luminaire on the chain or cable that
you are using and then tighten the hook’s
fastening screw with a screw driver.
or L2
Neutral
or Line 2
