User’s Manual
II
、
Transportation and Placement
Transportation
：
1. Take out packing and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glass limestone residues.
2. Keep a distance from the wall of 10 cm at least. Please level the unit by settling the adjustable feet.
3. Cabinet must be installed on a perfectly even surface, far away from any heat source included sun
ray.
4. Do not install the unit in open places and do not expose it to rain.
Note
：
schematic diagram for demand size of product space
Choosing the installation location
：
The unit is for indoor application only.
Due to the fact that the unit has a glass door, its performance is highly influenced by environmental
conditions. To minimize the environmental effects on the unit’s performance, the following are
recommended:
The unit is not to be placed near any kind of heat source
The unit is not to be placed near or inside air streams produced by ventilation fans, open doors
and/ or windows
The unit is not to be situated under a roof-mounted ventilation system.
The unit should have sufficient space to ‘breathe’ (always use the rear space to ensure minimum
clearance).
The unit should not be placed under direct sunlight.
