Premium Poly Patios AD-0116 Manual Download

Page: 3 / 4

T20

T25

Attach Parts A & B to Part F by

inserting Hardware e into the pre-drilled

holes and rotating clockwise, stopping

when the assembly is tight

Repeat Steps 1 & 2 with Parts C, D, E, G

Place Part E into the pre-cut slot &

attach it with Hardware b

Please read entire instructions

before beginning

Attach Part H to the previous

assemblies using Hardware d, this step is

made easier if assembly is upside down

AD-0116 Assembly

1-877-904-1234

www.Poly-Lumber-Furniture.com

Summary of Contents for AD-0116

Page 1: ...REV02 6 19 COASTAL SINGLE SWING AD 0116 1 AD 0116 Assembly 1 877 904 1234 www Poly Lumber Furniture com...

Page 2: ...SA 00110 1 G RIGHT ARM ASSEMBLY SA 00111 1 H SEAT ASSEMBLY SA 00104 1 I BACK ASSEMBLY SA 00069 1 HARDWARE PART DESCRIPTION PART NO QTY a 8 X 2 TORX SCREW H 0000 S82 2 b 8 X 2 1 2 TORX SCREW H 0000 S8...

Page 3: ...the assembly is tight 3 Repeat Steps 1 2 with Parts C D E G 2 Place Part E into the pre cut slot attach it with Hardware b Please read entire instructions before beginning 4 Attach Part H to the previ...

Page 4: ...in image 1 with Hardware h 2 Feed the ends of one rope through the two holes of one arm Pass the rope ends through one eyebolt each and install the clamp Hardware g in image 2 by removing the screws...