Premium PWA1210G, User Manual

Controls

Power Pad

Turns air conditioner on and off. When
turned on, the display will show the room
temperature.

Display

Shows the room temperature or time
remaining on the Delay timer. Shows the 

Set

temperature while setting the temperature in

Cool

or 

Energy Saver

modes. The 

Set

light will

turn on while setting.

NOTE:

The display will change to show the

room temperature after settings have been
made. To recall the 

Set

temperature, press the

Temp Increase 

▲ 

or

Decrease 

▼ 

pads.

Temp Increase 

▲ 

/Decrease 

▼ 

Pads

Use to set temperature when in 

Cool

or 

Energy

Saver 

mode. The 

Set

light will turn on while

setting.

Delay Timer Increase 

▲ 

(+) /Decrease 

▼ 

(–)

Pads

Each touch of the 

Increase 

▲ 

/ Decrease 

▼

pads on the unit or the 

Increase 

+ 

/ Decrease 

–

pads on the remote control will set the delay
time when using the 

Delay 1–24hr

timer (

).

The 

Set

light will turn on while setting.

Fan Speed Pads

Use to set the fan speed to 

Low, Med, High 

or 

Auto 

on the unit

. NOTE:

On the remote

control, use the fan speed 

Increase 

+ 

/

Decrease 

–

pads to set the fan speeds to 

Low

,

Med

or 

High

. Use the 

Auto

pad to turn 

Auto

fan on.

Mode Pad

Use to set the air conditioner to 

Cool

, 

Energy

Saver

or 

Fan Only

mode.

Delay Pads

Delay ON—

When the air conditioner is off, it

can be set to automatically come on in 1 to 24
hours at its previous mode and fan settings. 

Delay OFF—

When the air conditioner is on, 

it can be set to automatically turn off in 1 to 
24 hours. 

How to set:

Press the 

Delay 1–24hr

pad on the unit or

the

pad on the remote control. Each touch

of the 

Increase 

▲

/ Decrease 

▼ 

pads on the

unit or the 

Increase 

+ 

/ Decrease 

– 

pads on 

the remote control will set the timer in 
1-hour intervals. The 

Set

light will turn on

while setting.

To review the remaining time on the 

Delay

1–24hr 

timer, press the 

Delay 1–24hr

pad on the

unit or the

pad on the remote control. Use

the 

Increase 

▲ 

/ Decrease 

▼ 

pads on the unit

or the 

Increase 

+ 

/ Decrease 

– 

pads on the

remote control to set a new time if desired.

To cancel the timer,

press the 

Delay 1–24hr

pad

3

■ 

To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.

■ 

The remote control signal has a range of 
up to 20 feet.

■ 

Make sure nothing is between the air conditioner
and the remote control that could block the
signal.

■ 

Make sure batteries are fresh and installed
correctly as indicated on the remote control.

Remote Control

on the

unit or the 

pad 

on the  

remote

 control.