Accent 700 Hardware Manual
23
Use the arrow keys to find “
Last Known Good Configuration
” and select the <ENTER> key on the keyboard.
If
the device returns to the “Advanced Boot Options” screen again
, or if screen continues to appear while using
the device, restore the Windows operating system.
The Restore process will
erase everything
on the device's hard drive including internet access, programs,
hardware drivers, etc. Before restoring the device, call the PRC Service Department at (800)262-1990. Outside
the U.S., call the local PRC distributor.
The Restore process generally takes 20 minutes to an hour
. You must be available before the actual Restore
begins and when the Restore is completed.
Plug in the
Battery Charger
.
Plug the USB keyboard into the USB connector on the device.
Write down the 25- digit Windows Product Key Number
located on the label on the back of the device.
This code will be entered later in the restore process.
Restoring your Device
Use the arrow keys on the keyboard to step to “
Repair your Computer
.” Press <ENTER> on the keyboard
to select the option.
Stay with the device
during this pre-installation process and answer all on-screen questions.
A warning alert stating that the restore process can take up to an hour. Select OK to continue.
When the pre-installation process is complete, the Restore will begin.
When the Restore is completed, one of two messages will appear:
"Restore completed successfully. Select OK to reboot." Select
OK on the
Touch Screen
To continue with the reboot, go to
When the Restore is Successful
below.
If the following message "
Restore failed. Select OK to reboot
”, appears, select
OK
. If this second restore
fails, contact PRC Service Department at (800) 262-1984. Outside the U.S., contact the local PRC distributor.
When the Restore is Successful
Windows Product Key
Number
