:DONHU7DONHU 0DQXDO
Select Standard or Extended Speech
6XPPDU\
:DONHU7DONHUKDV
PLQXWHRIKLJKTXDOLW\6WDQGDUGVSHHFKRU
PLQXWHVRIORZHUTXDOLW\([WHQGHGVSHHFK6HOHFWHLWKHU
6WDQGDUGRU([WHQGHGVSHHFKLQWKH&RQWURO3DQHO
The WalkerTalker records your messages in digitized speech. This
means you simply speak into the WalkerTalker and it plays back
what you have recorded. There are two settings for recording
messages, Standard or Extended speech. Messages recorded in
Standard speech sound a little better when they are spoken by the
WalkerTalker than messages recorded in Extended speech. In
Standard speech mode, the WalkerTalker can record up to 1
minute of high quality speech. Using Extended speech, you can
record up to 2 minutes of lower quality speech. Standard speech
takes up more memory space than Extended speech
You can record some messages in high quality speech and some in
lower quality. You might store messages that are used mainly
around family in Extended speech and messages that are used
mostly in public/social situations in Standard speech. Recording in
both Standard and Extended speech will give you somewhere
between 1 and 2 minutes of speech. You must select either
Standard or Extended speech before you record a message.
Selecting either one afterwards will have no bearing on how the
message sounds.
To Switch from Standard to Extended speech:
Open the Control Panel and press the button labeled
STD/EXT
. The
LED lights momentarily to indicate that you are using
EXTENDED
speech. After this, when you want to check whether you are using
Standard or Extended speech, press the
STORE
button. If you are in
EXTENDED
speech, the LED will come on and stay on while you
store a message or it will go out after 60 seconds if you do nothing.
If you are using
STANDARD
speech and press the
STORE
button, the
LED will not light.
STANDARD
speech is the default setting.
