Page 8
Presentation Switchers, Inc.
Select Input / Source
This command selects a source or input device to display.
Command Format
SW #
Replace # with the input to display (1-5). End command with
carriage return.
Examples in ASCII
Response
SW 2
None.
Examples in HEX
Response
53 57 20 32 0D
None.
Command Line Example
PS190 by Presentation Switchers
Firmware Revision 1.0
$ SW 2
SW 2
Get Current Input / Source
This command displays the currently selected input being routed to the output device.
Command Format
SW
Type return (carriage return) after typing SW.
Examples in ASCII
Response
SW
SW 4
Examples in HEX
Response
53 57 0D
53 57 20 34 0D
Command Line Example
PS190 by Presentation Switchers
Firmware Revision 1.0
$ SW
SW 4
Set Master Volume Level
This command sets the current master volume level of the PS190.
Command Format
VOL #
Replace # with the volume level (1-100). End command with
carriage return.
Examples in ASCII
Response