WARNING: TWO ADULTS NEEDED
FOR ASSEMBLY
FOOSBALL TABLE ASSEMBLY
ASSEMBLY INSTRUCTIONS
5
1
CUT CORNERS OF THE BOX TOP AND PLACE IT ON
THE FLOOR TO PROTECT THE PARTS AS THE UNIT IS
BEING ASSEMBLED. PLACE SIDE PANELS
P1
UPSIDE
DOWN WITH THE SLOT FACING INWARD AS SHOWN
IN
FIGURE 1A
.(BALL ENTRY HOLE WILL BE CLOSEST
TO THE FLOOR.) TO EASE ASSEMBLY PUSH THE
PRE-ASSEMBLED BUSHINGS AND PLASTIC WASHERS
ON THE RODS UP AGAINST THE MEN. AT THIS TIME
DO NOT CUT THE RUBBER BANDS THAT HOLD THE
ASSEMBLY TOGETHER. ALIGN THE RODS AS SHOWN
IN
FIGURE 1A
. THE HANDLE ENDS OF THE RODS ARE
THE ENDS WITH THE HOLES APPROX. 1/2"FROM THE
END.
REMEMBER:
You are working upside down. All of the home team must
face one direction and the away
team
the
opposite direction
.
All home team handles will go on one side, all the away team
on the other
side
. The handle ends are the ends with the holes
approx. 1/2" from the end of the rod.
INSERT THE RODS THROUGH THE ROD BUSHINGS
IN ONE SIDE PANEL AS SHOWN IN
FIGURE 1A
.
2
IMPORTANT:
Please read through the instruction book before attempting assembly
to familiarize yourself with all part and assembly steps.
