2
Application and Deployment
2.5
CDL Rigging Extension Bar Installation Instructions
CDL-series
Owner’s Manual
6
2.5
CDL Rigging Extension Bar Installation Instructions
The CDL Rigging Extension Bar is an optional accessory for the CDL Rigging Grid that
provides upward or downward tilt control for any suspended installation that
requires it.
1. Align the CDL Rigging Extension Bar with the center support of the
CDL Rigging Grid.
For downward tilt, the bar should be mounted at the rear of the
loudspeaker array. For upward tilt, the bar should be mounted at the front
of the array. The illustrations in this section show the downward tilt
configuration only.
2. Insert the first clevis pin into the outermost through-hole.
3. Lock the clevis pin in place using a cotter pin.
4. Insert the second clevis pin into the inner through-hole.
5. Insert a cotter pin into second clevis pin to lock it into place.
Summary of Contents for CDL Series
Page 1: ...CDL series Constant Directivity Loudspeakers Owner s Manual www presonus com English...
Page 2: ......
Page 4: ......
Page 26: ......
