background image

PRESONUS LIMITED WARRANTY 

 

 

© 2007, PreSonus Audio Electronics, Inc. 

All Rights Reserved. 

PreSonus Audio Electronics Inc. warrants this product to be free of defects in material and workmanship for a 
period of one year from the date of original retail purchase.  This warranty is enforceable only by the original 
retail purchaser.  To be protected by this warranty, the purchaser must complete and return the enclosed 
warranty card within 14 days of purchase.  During the warranty period PreSonus shall, at its sole and absolute 
option, either repair or replace, free of charge, any product that proves to be defective on inspection by 
PreSonus or its 

authorized service representative

.  To obtain warranty service, the purchaser must first call or 

write PreSonus at the address and telephone number printed below to obtain a Return Authorization Number 
and instructions of where to return the unit for service.  All inquiries must be accompanied by a description of 
the problem.  All authorized returns must be sent to the PreSonus repair facility postage prepaid, insured and 
properly packaged.  PreSonus reserves the right to update any unit returned for repair.  PreSonus reserves the 
right to change or improve the design of the product at any time without prior notice.  This warranty does not 
cover claims for damage due to abuse, neglect, alteration or attempted repair by unauthorized personnel, and is 
limited to failures arising during normal use that are due to defects in material or workmanship in the product.  
Any implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are 
limited in duration to the length of this limited warranty.  Some states do not allow limitations on how long an 
implied warranty lasts, so the above limitation may not apply to you.  In no event will PreSonus be liable for 
incidental, consequential or other damages resulting from the breach of any express or implied warranty, 
including, among other things, damage to property, damage based on inconvenience or on loss of use of the 
product, and, to the extent permitted by law, damages for personal injury.  Some states do not allow the 
exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not 
apply to you.  This warranty gives you specific legal rights, and you may also have other rights, which vary from 
state to state.  This warranty only applies to products sold and used in the United States of America.  For 
warranty information in all other countries please refer to your local distributor. 
 
 
 
PreSonus Audio Electronics, Inc. 
7257 Florida Blvd. 
Baton Rouge, LA 70806 
www.PreSonus.com

Summary of Contents for FP10 - SCHEMA 1































Reviews: