4
2
Networking Your StudioLive AI Loudspeaker
2.2
Step 2: Updating Your Loudspeaker Firmware
SL-Dante-SPK
User Guide
2.2
Step 2: Updating Your Loudspeaker Firmware
SL-Dante-SPK requires a firmware recovery for your StudioLive AI loudspeaker. The
firmware is available from your My PreSonus account at https://my.presonus.com.
Power User Tip:
You must register your SL-Dante-SPK option card to ensure that you
have the correct firmware in your account.
1. Log into your My PreSonus account.
2. Download the firmware recovery .zip archive for your loudspeaker.
3. Open your Downloads folder and locate the StudioLive firmware folder.
4. Depending on your system preferences, the .zip archive containing the firmware
folder might not automatically decompress. To expand it, simply double-click it.
5. Open the firmware folder; you will find four files inside: inivars.scr, recovery.scr,
rootfs.img, and ulmage.
6. Connect a FAT32-formatted USB thumb drive to your computer.
Power User Tip:
Most small USB drives (16 GB or less) are already formatted correctly,
so no formatting is required. If your loudspeaker does not detect your thumb drive,
verify that the drive is formatted correctly.
7. Select all four of the firmware recovery files and either copy/paste or drag them
to the root of your thumb drive. Eject your drive and disconnect it from your
computer.
8. Label the drive with the model firmware you copied to it.
NOTE:
Each StudioLive AI loudspeaker model has its own firmware files. Installing
the wrong model’s firmware on a loudspeaker will cause it to behave abnormally and
may require a repair. For example, don’t install 315AI firmware on a 312AI. If you are
upgrading firmware on multiple StudioLive AI-series models, we recommend that
you label each thumb drive to ensure that the correct firmware is loaded onto each
loudspeaker.
9.
Off
Power off your StudioLive AI loudspeaker.
10.
USB Dr
iv
e
Connect the USB thumb drive to the USB connection on your StudioLive AI
loudspeaker.
