5
Service inspection
We recommend that a service inspection is performed once
annually.
1: Check all screws and tighten if necessary.
2: Check surfaces for damage, and clean the product in
accordance with cleaning guide.
3: Check that the arm locks into position when raised.
4: Check all moving parts, lubricate if necessary with
silicon spray.
Faultfi nding
Fault
Cause
Remedy
Arm seems unstable when
in horizontal position.
The horizontal slide is not
tightened.
Tighten the slide using an
Allen key.
Arm seems unstable when
in vertical position.
The vertical slide is not
tightened.
Tighten the vertical slide
fully. Use the lock handle.
The cushion spring in the
arm does not cushion
properly.
The spring may be broken.
Contact Pressalit Care or
your dealer.
Support arm on a
horizontally-adjustable
product cannot be moved
on the wall track.
Dirt on the wall track.
Clean using a mild detergent
and dry with a soft cloth.
Apply a lubricant in the form
of silicon spray, and wipe off
with a soft cloth.
Support arm on a vertically-
adjustable product cannot
be moved on the track.
Dirt on the track.
Clean using a mild detergent
and dry with a soft cloth.
Apply a lubricant in the form
of silicon spray, and wipe off
with a soft cloth.
The arm on a vertically-
adjustable product cannot
be tightened.
Lock handle stuck.
Free handle by turning
clockwise. Retighten the
adjustable product.
Contact Pressalit Care or your dealer if the problem cannot
be remedied. Do not attempt to repair the product yourself,
as this will invalidate the guarantee.
Summary of Contents for R3016 Series
Page 35: ...35...
