G
Operating Instructions & Parts Manual for Polypropylene Rotary Drum Pump
IMPORTANT: READ BEFORE USING
1. Description
2. Technical data
Pump Type
Rotary - Vane
Flow
8 oz / Stroke
Maximum Fluid Temperature
130°F / 54°C
Bung Adapter
2” Male
Suction Tube Length
40” Maximum
Inlet
1-¼” O.D.
Outlet
1” O.D. Curved Spout
Wetted Materials of Construction
PP, PVDF & Phenolic
Maximum Viscosity
2,000 SSU
3. General Safety Information
Always carefully read, thoroughly understand and follow the pump operating instructions. Use this
pump correctly and with care for the purpose for which it is intended. Failure to do may cause damage
or personal injury, and will invalidate the warranty. Retain instructions for future reference.
Contact your chemical or fl uid supplier to check for compatibility with pump prior to installation and
operation.
Prior to use, always carefully and thoroughly read and understand the OSHA information contained in the
Safety Data Sheet supplied for the chemical which is to be pumped.
Wear protective clothing (goggles, face masks, long sleeves, long pants, gloves, aprons, etc.) as set forth in
the OSHA Safety Data Sheet when pumping any hazardous chemicals.
When using fl ammable liquids, pump containers should be grounded to avoid static electricity.
Any pump used for transferring fl ammable liquids must be stored in a ventilated area after use.
Pump should be washed out before it is used since processing lubricants may contaminate the fl uids.
Prior to use, inspect your pump thoroughly verifying its proper assembly.
If pump is removed from drum, it should be thoroughly rinsed in a liquid that is compatible with both the
pump and fl uid.
Polypropylene Rotary Drum Pump is designed for
transferring organic acids, organic alcohols, detergents,
screen cleaners and other water soluble inorganic
chemicals. For exact media resistance see stability list.
Supply with 2“ bung adapter and a 3-piece PP suction
tube to fi t most 15, 30 and 55 gallon drums.
